Abrasives Technical Specifications
Reference tables for FEPA P grades, grain and backing types, and unit conversions — organized so you can build accurate specifications before requesting a quote.
FEPA P Grades and Uses
FEPA P (Federation of European Producers of Abrasives) is the international standard for grit size numbering. The higher the number, the finer the grain.
| Grade | Coarseness | Typical uses |
|---|---|---|
| P40 | Extra coarse | Fast cutting of coarse material |
| P60 | Coarse | Paint and rust removal |
| P80 | Medium coarse | Surface preparation before finishing |
| P100 | Medium | First-pass finishing of panels |
| P120 | Medium fine | Edge smoothing |
| P150 | Fine | Uniform finishing |
| P180 | Fine | Preparation before painting |
| P240 | Very fine | First-stage final finishing |
| P320 | Very fine | Smoothing between paint coats |
| P400 | Very fine | Primary polishing |
| P600 | Ultra fine | Metal polishing |
| P800 | Ultra fine | Metal final finishing |
| P1000 | Micro | Paint polishing |
| P3000 | Micro | High-gloss final polishing |
| P4000 | Micro | Mirror polishing |
| P5000 | Micro (non-FEPA standard) | Mirror polishing (extended grade) |
From Inches to mm
| Diameter (inches) | Diameter (mm) | Notes |
|---|---|---|
| 3 in | 75mm | Nominal diameter (exact value 76.2 mm) |
| 4 in | 100mm | Nominal diameter (exact value 101.6 mm) |
| 5 in | 125mm | Nominal diameter (exact value 127 mm) |
| 6 in | 150mm | Nominal diameter (exact value 152.4 mm) |
Four Main Abrasive Grain Types
Backings for Belts and Discs
Technical Questions About Specifications
What is the difference between FEPA P and CAMI grades?
FEPA P is the European/international standard (used by most countries), while CAMI is the US standard. The numbers do not match exactly (e.g., P120 ≈ CAMI 120, but P400 ≠ CAMI 400). To avoid confusion, we recommend specifying FEPA P grades in supply requests.
How is the right grain type determined for a workpiece?
Wood and general work: aluminum oxide. Hard metals and heavy stock removal: zirconia alumina. High-performance industrial processes: ceramic. Stone, glass, and final finishing: silicon carbide.
Which backing suits the application best?
Flat faces and narrow belts: paper. Heavy belts and metal: cloth. Humid or heavy-duty environments: polymer fiber. Sanding with dust extraction: open mesh.
Pin Down Your Specification with This Reference
Choose the grade, grain type, and backing from the tables above and send them in the quote form for accurate pricing.
